For Hire or Sale
Medium Duty trackway panel, designed for work areas and roads for light goods vehicles and cars. A two-traction surface optiondepending on pedestrian or vehicle use, which is easily installed by hand.
Panel Weight: 36kg
Loading Capacity: 80 Tonnes (Ground Dependant)
Panel Thickness: 12mm
Material: High Density Polyethylene (HDPE)
Environment: 100% recyclable
Construction
Parking
Events
Agriculture
Pedestrian
Euromat have an extremely grippy surface on both sides which aids traction for vehicles and pedestrians, as well to the ground, particularly when used on slight inclines. Euromats have a unique chevron design on their surface which is effective at dispersing mud and ensuring the highest performance possible.
With several different connector options, this product is suited to a range of industries and possible uses. The plastic used in these medium duty ground protection mats is non-absorbent, therefore will last on the ground in wet conditions much longer than using ineffective solutions such as plywood as a method for driving over wet boggy areas.
Unlike plywood these Euromats can be pressure washed off and used again and again!
This product is available for both Hiring, and Sale
Installation (Removal is the opposite procedure)
Manual Handling
Each mat should be lifted by 2 or more people.
Handling
To lift a stack or stillage of mats from a lorry bed use an appropriate forklift truck. Stacks are normally30-35.Place mat on to the ground to provide the coverage required. Ground preparation is not usually needed.
Connecting Mats
As each mat is placed it is recommended to connect it to the neighbouring mats using the correct connector. To connect 2 mats, place the 2-way connect or underneath the mats. The raised cylinders on the connector unit should fit within the holes on the corner of each mat. When in place secure using 2 connection bolts,(M10 x 25 with steel and rubber washer) taking care not to overtighten. Where 4 mats need to be place together, use the 4-way connector following the same process.
• Material: High Density Polyethylene (HDPE)
• Panel Size: 2440mm x 1200mm (8×4”)
• Panel Thickness: 12mm
• Panel Weight: 36kg
• Loading Capacity: 80 tonnes (ground dependant)
• Environment: 100% recyclable
Black Euromat is made from recycled material
UK designed / EU made
High pressure compression moulded in one piece
Sand blasted finish for micro-traction
Based in Essex, but operating nationwide, we pride ourselves on delivering a service to businesses and individuals all across the country. Below includes a number of counties we have operated in.
Locations A-Z
Bedfordshire, Berkshire, Bristol, Buckinghamshire, Cambridgeshire, Cheshire, Cornwall, County Durham, Cumberland, Derbyshire, Devon, Dorset, Essex, Gloucestershire, Hampshire, Herefordshire, Hertfordshire, Huntingdonshire, Kent, Lancashire, Leicestershire, Lincolnshire, Middlesex, Norfolk, Northamptonshire, Northumberland, Nottinghamshire, Oxfordshire, Rutland, Shropshire, Somerset, Staffordshire, Suffolk, Surrey, Sussex, Warwickshire, Westmorland, Wiltshire, Worcestershire, Yorkshire
The quote form has been sent and we will be in touch as soon as possible.
